Diy Epoxy Countertops

By admin  

diy epoxy countertops

Woodworking Tips To Make bread boards and cutting

Bread and cutting board are quick and easy projects that make great gifts for birthdays, parties, premieres homes weddings, and more. Here are 11 great tips to do a better job in making these tables. Visit the plans and projects "> Woodworking plans for more Web pages carpentry items.

1: Choosing the right wood. When making bread / cutting boards, choose fine-grained hardwoods like maple, cherry, walnut, birch, etc. for maximum durability. The use of wood strips in contrast improves the appearance of these meetings.

2: with the grain. For stability, it is best to arrange your boards so the wood grain of each goes in the same direction. Annual vertical rings, provided possible, are best.

3: cut strips. Copy all the strips of wood to exactly the same width, representing almost 1 / 16 "more wider than the thickness of the cutting board you're doing. Once booted, run every advantage on the brush, removing 1 / 32 "at each step.

4: To increase the resistance … sometimes it's a good idea to run a 1 / 4 "- 20 threaded steel rod through its board cut side to side. This is especially important to help prevent warping and separation by making large deck boards, which are more than 15 "wide. A bar of 6" to 8 "is a good idea. Drill all holes in the bar of a drill press, at the stops to ensure that each hole is exactly the same place. In its two parts out of stock, drill a ¼ "through holes for bar ends. In contrast, the bore of 3 / 8" to 7 / 16 "deep counterbore to hide the screws at each end of each rod.

5: Choose the right glue. Always use a waterproof glue to the pan and cutting boards. Titebond II (r) makes a good choice as two parts resorcinol epoxy adhesive. If you are using resorcinol, be sure to wipe all excess glue from surfaces before it dries. Leaving hit hard on the surface, then run the plate mounted through a thickness planer, you could nick your planer knives.

6: all surfaces smooth board. If you have a thickness planer, run the two sides of the card through the brush before continuing. If you do not have a planer thick, can smooth the surface with a manual scraper, belt Sander, base of the sander or any combination of these tools.

7: Round all board corners for a smoother appearance. Once your board has stuck together and allows the queue depth tuning, it is recommended that the radio all over board to help to avoid chipping or breaking the corners of your completed project. Do this on your bandsaw or scrollsaw, then smooth them carefully in the disc sander.

8: Adding a channel to contain liquids. Use a "3-in-1 router or a little bit unmanned basic box to form a channel around all sides of the plate about 3 / 4 "from the edges. This channel will help to contain the blood of meat or any other liquid.

9: Round-over all edges of the board. Use a little Round-Over Router to "shoot" all the edges of the board to look better and feel better when handling the plate.

10: Make a sanding Final, light hand … to eliminate the "fuzzy" surfaces or edges. Tracking using a tack cloth to remove any residual dust before applying finish.

11: Apply the proper finish. Finish these tips like these (and all wooden utensils are designed to enter food contact) with a suitable finish such as Salad Bowl Finish or Preserve Oil Finish.Visit title = "woodworking DIY projects"> DIY woodworking projects page for more items of carpentry.

About the Author

This author writes about Wooden Furniture Plans and Woodworking Plans and Ideas.Visit the Woodworking4Home Review website and get 14000 woodworking plans.

Wall Mounted Fountains, Decorative Concrete Training Dvd’s


Post a Comment

Your email is never shared. Required fields are marked *

*
*